User Tools

Site Tools


troubleshooting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
troubleshooting [2009/03/24 00:58]
netrolller3d Convert to wikilink.
troubleshooting [2009/05/04 00:20]
mister_x Update link to forum
Line 11: Line 11:
   * Something is wrong with your card (firmware problem ?)    * Something is wrong with your card (firmware problem ?) 
   * **By the way, beacons are just unencrypted announcement packets. They'​re totally useless for WEP cracking.** ​   * **By the way, beacons are just unencrypted announcement packets. They'​re totally useless for WEP cracking.** ​
- 
- 
- 
  
 ===== I can't inject packets ​ ===== ===== I can't inject packets ​ =====
Line 37: Line 34:
  
 ===== I have a Prism2 card, but airodump-ng / aireplay-ng doesn'​t seem to work !  ===== ===== I have a Prism2 card, but airodump-ng / aireplay-ng doesn'​t seem to work !  =====
-First step, make sure you aren't using the orinoco driver. If the interface name is wlan0, then the driver is HostAP or wlan-ng. However if the interface name is eth0 or eth1, then the driver is orinoco and you must disable the driver (use cardctl ident to know you card identifier, then edit /​etc/​pcmcia/​config,​ replace orinoco_cs with hostap_cs and restart cardmgr). ​+First step, make sure you aren't using the orinoco driver. If the interface name is wlan0, then the driver is HostAP or wlan-ng. However if the interface name is eth0 or eth1, then the driver is orinoco and you must disable the driver (on 2.4 kernels, ​use cardctl ident to know you card identifier, then edit /​etc/​pcmcia/​config,​ replace orinoco_cs with hostap_cs and restart cardmgr; on 2.6 kernels, add "​blacklist orinoco_cs"​ to /​etc/​modprobe.d/​blacklist).
  
 Also, it can be a firmware problem. Old firmwares have trouble with test mode 0x0A (used by the HostAP / wlan-ng injection patches), so make sure yours is up to date (see [[prism2_flashing|Prism2 flashing]] for instructions). The recommended station firmware version is 1.7.4. If it doesn'​t work well (kismet or airodump-ng stalls after capturing a couple of packets), try STA 1.5.6 instead (either s1010506.hex for old Prism2 cards, or sf010506.hex for newer ones). ​ Also, it can be a firmware problem. Old firmwares have trouble with test mode 0x0A (used by the HostAP / wlan-ng injection patches), so make sure yours is up to date (see [[prism2_flashing|Prism2 flashing]] for instructions). The recommended station firmware version is 1.7.4. If it doesn'​t work well (kismet or airodump-ng stalls after capturing a couple of packets), try STA 1.5.6 instead (either s1010506.hex for old Prism2 cards, or sf010506.hex for newer ones). ​
Line 84: Line 81:
 ===== Why aircrack-ng stalls while reading a .ivs file and does not start cracking ?  ===== ===== Why aircrack-ng stalls while reading a .ivs file and does not start cracking ?  =====
 Your .ivs file may have been corrupted if you used pcap2ivs. Read previous point. ​ Your .ivs file may have been corrupted if you used pcap2ivs. Read previous point. ​
- 
  
 ===== Why does airodump-ng stop capturing packets after a few seconds ?  ===== ===== Why does airodump-ng stop capturing packets after a few seconds ?  =====
Line 90: Line 86:
 [[http://​hostap.epitest.fi/​wpa_supplicant/​|wpa_supplicant]] or a network manager may be running and try to get connected to an Access Point. You should stop it before running airodump-ng. [[http://​hostap.epitest.fi/​wpa_supplicant/​|wpa_supplicant]] or a network manager may be running and try to get connected to an Access Point. You should stop it before running airodump-ng.
  
-===== Why does my computer ​locks up when injecting packets ? Is there a solution? ====+===== Why does my computer ​lock up when injecting packets? Is there a solution? ====
  
-See http://​tinyshell.be/​aircrackng/​forum/​index.php?​topic=901.0+See http://​forum.aircrack-ng.org/​index.php?​topic=901.0
troubleshooting.txt ยท Last modified: 2009/05/04 00:20 by mister_x