Differences

This shows you the differences between two versions of the page.

--- airserv-ng [2007/05/08 18:06] – corections thanks to TuTuFF darkaudax
+++ airserv-ng [2009/09/26 20:46] (current) – Fixed typos darkaudax
@@ Line 1: / Line 1: @@
-====== Airtun-ng ======
+====== Airserv-ng ======
-++++++ IMPORTANT ++++++\\
-++++++ IMPORTANT ++++++\\
-++++++ IMPORTANT ++++++\\
-This functionality will be available in a future release. It is NOT available currently.
-++++++ IMPORTANT ++++++\\
-++++++ IMPORTANT ++++++\\
-++++++ IMPORTANT ++++++\\
 ===== Description =====
@@ Line 58: / Line 48: @@
 **Debug level of 3**\\
-Contents: Displays a message each time a packet is sent to the client.  The packet length is indicated as well.  This level includes all the level 1 and level 2 messages.
+Contents: Displays a message each time a packet is sent to the client.  The packet length is indicated as well.  This level includes both the level 1 and level 2 messages.
 Examples:
@@ Line 68: / Line 58: @@
 ===== Usage Examples =====
-For all uses, you must first put your wireless card into monitor mode using [[airmon-ng]] or a similar technique.
+In all cases, you must first put your wireless card into monitor mode using [[airmon-ng]] or a similar technique.
@@ Line 90: / Line 81: @@
    Serving ath0 chan 1 on port 666
-At this point you may use any of the aircrack-ng suite programs and specify "127.0.0.1:666" instead of the network interface.  127.0.0.1 is the "loopback" IP of your PC and 666 is the port number that the server is running on.  Remember that 666 is the default port number.
+At this point you may use any of the aircrack-ng suite programs and specify "127.0.0.1:666" instead of the network interface. 127.0.0.1 is the "loopback" IP of your PC and 666 is the port number that the server is running on. Remember that 666 is the default port number.
+Example:
+  airodump-ng 127.0.0.1:666
+It will start scanning all networks.
-For example: You could enter "airodump-ng 127.0.0.1:666" to start scaning all the networks.
 ==== Remote machine ====
-This scenario has the server running on one system with an IP address of 192.168.0.15 and the applications on another system with an IP address of 192.168.0.58.
+This scenario has the server running on one system with an IP address of 192.168.0.1 and the applications (airodump-ng, aireplay-ng, ...) on another system.
 Start the program with:
@@ Line 105: / Line 100: @@
 Where:
-   * -d ath0 is the network card to use.  Specify the network interface for your particular card.
+   * -d ath0 is the network card to use. Specify the network interface for your particular card.
 The system responds:
@@ Line 114: / Line 109: @@
    Serving ath0 chan 1 on port 666
-At this point you may use any of the aircrack-ng suite programs on the second system and specify "192.168.0.15:666" instead of the network interface.  192.168.0.15 is the IP address of the server system and 666 is the port number that the server is running on.  Remember that 666 is the default port number.
+At this point you may use any of the aircrack-ng suite programs on the second system and specify "192.168.0.1:666" instead of the network interface.  192.168.0.1 is the IP address of the server system and 666 is the port number that the server is running on. Remember that 666 is the default port number.
-On the second system, you would enter "airodump-ng 192.168.0.15:666" to start scaning all the networks.  You may run aircrack-ng applications on as many other systems as you want by simply specifying "192.168.0.15:666" as the network interface.
+On the second system, you would enter "airodump-ng 192.168.0.1:666" to start scanning all the networks. You may run aircrack-ng applications on as many other systems as you want by simply specifying "192.168.0.1:666" as the network interface.
+Example:
+  airodump-ng -c 6 192.168.0.1:666
 ===== Usage Tips =====
 None at this time.
 ===== Usage Troubleshooting =====
@@ Line 128: / Line 125: @@
 Is your card in monitor mode?  Make sure your card is in monitor mode prior to starting airserv-ng.
-Are you connecting to the correct IP and TCP port number?  Double check this.  Remember that the default port number is 666.
+Are you connecting to the correct IP and TCP port number?  Double check this.  Remember that the default port number is 666.  You can use the [[injection_test#airserv-ng_test|aireplay-ng injection test]] to verify connectivity and proper operation.
 Firewall software can block communication so make sure the following allows communication to and from the server port.  This applies to both the machine running airserv-ng and the client machine.  Items to check:
@@ Line 145: / Line 142: @@
   * Under linux: "netstat -an" or "lsof -i" and look for the port number.
   * Under Window, open a command line and type "netstat -an" then look for the port number.
+At present, there are known issues with the madwifi-ng drivers for atheros-based cards.  Channel hopping and setting the channel does not always work correctly.  Very often the card is not set to the requested channel and/or the hopping does not take place.