====== Injectiontest ======
**Important note:** This option is only available on aircrack-ng 0.9 and up.
===== Description =====
The injectiontest determines if your card can successfully inject a... n tests can be successfully performed.
The basic injectiontest provides additional valuable information as well.... y to [[airserv-ng]]. Once the basic connectivity test is completed then it proceeds with the standard injection tests via the wireless card linked to airserv-ng.
option.
* Aireplay-ng: Increase amount of AP to test when running injectiontest.
* Airodump-ng: Fixed 802.11a channel hopp... cards
* aireplay-ng: Added possibility to limit injectiontest to one AP "-a" or "-e"
* aireplay-ng: Added BSS... May 2007:**
* aireplay-ng: Added new 'attack': injectiontest (--test)
* aireplay-ng: disallow injection with wlanng & kernel > 2.6.11
* airtun-ng: Fixed: an option wasn't
ttack 8: [[WPA Migration Mode]]
* Attack 9: [[injection_test|Injectiontest]]
===== Usage =====
This section provides a gen... MAC address
*-e essid : For fakeauth attack or injectiontest, it sets target AP SSID. This is optional when t... --fast" : chooses first matching packet. For test mode, it just checks basic injection and skips all other tests.
* "-R" disables /dev... : generates valid keystream (-5)
* - -test : injectiontest (-9)
===== Fragmentation vs. C
e! Non disponibile al momento.)
* Attack 9: [[injection_test|Injectiontest]]
===== Utilizzo =====
Questa sezione fornisce ... nt : genera validi keystream (-5)
* - -test : test per l'injection (-9)
===== Fragmentation vs. Chopchop =====
Di ... tre che:
* Eccetto che per la deauthenticaion, injectiontest e fake authentication, le altre modalita' di aire... sia correttamente patchata ed installata. Usare l'injectiontest per confermare la compatibilita' della scheda.
on assumes:
* You are using drivers patched for injection. Use the [[injection_test|injectiontest]] to confirm your card can inject prior to procee... n communicate with the specific AP by following [[injection_test#hidden_or_specific_ssid|these instructions]].
*... ce in monitor mode on the specific AP channel
- Test the injection capability of the wireless device to the AP
- U... u the frequency for each channel.
==== Step 2 - Test Wireless Device Packet Injection ====
The purpose of this step ensures that your
ilisez des drivers de carte réseau patchés pour l'injection. Vous pouvez utilisez le [[injection_test|test d'injection]] pour confirmer que votre carte rése... pacité à communiquer avec le PA en réalisant le [[injection_test#hidden_or_specific_ssid|test d'injection]].
* il existe au moins en équipemen... en mode moniteur sur un canal spécifique du PA
- Test des capacités d'injection de l'interface sans-fil sur le PA
- Utilisation ... res drivers.
Vous pouvez consulter la page sur [[injection_test|les tests d'injection]] pour plus de détails.
=
tation|Ataque de fragmentação]]
* Ataque 9: [[injection_test|Teste de Injeção]]
===== Uso =====
Esta seção ... oint. The exception being client disassociation, injectiontest and fake authentication modes. You must either d... ver is properly patched and installed. Use the [[injection_test|injectiontest]] to confirm your card can inject.
* You are ph... n communicate with the specific AP by following [[injection_test#hidden_or_specific_ssid|these instructions]].
*
(b/g/n)| New mac80211 Atheros drivers have native injection and monitoring support|
|Atmel|UNTESTED|802.11b Y... [[http://patches.aircrack-ng.org/rtl8187-mac80211-injection-speed-2.6.28-rc6.patch|this patch]])|
|RTL8187L|U... s)|YES (driver [[r8187|patching]] recommended for injection and required to view power levels)|
|TI\\ (ACX100... red) No fragmentation attack support. //Please re-test fragmentation with the [[acx1xx|mac80211 driver]]
ding and installing the new module, it is best to test that injection is working correctly. Use the [[injection_test|injectiontest]] to confirm your card can inject.
===== Usage Tips =====
Forum thread:
[[http://forum.aircrac... opic=2045.0|The complete how to of making bcm43xx injection work]]
Forum thread:
[[http://forum.aircrack-ng... dex.php?topic=2845.0|How I got the bcm43xx packet injection working in ubuntu 7.10]]
This forum thread may a
ure your card can inject by testing it with the [[injection_test|aireplay-ng injectiontest]]. Also specifically ensure you can communicate ... Again, this can be confirmed with the aireplay-ng injectiontest.
* Make sure to delete **prga.log** if you are
on assumes:
* You are using drivers patched for injection. Use the [[injection_test|injectiontest]] to confirm your card can inject prior to procee... n communicate with the specific AP by following [[injection_test#hidden_or_specific_ssid|these instructions]].
*... the access point is the single biggest reason why injection fails.
To associate with an access point, use ... However, it can be used to create new packets for injection. The creation of new packets will be covered late
on assumes:
* You are using drivers patched for injection. Use the [[injection_test|injectiontest]] to confirm your card can inject prior to procee... n communicate with the specific AP by following [[injection_test#hidden_or_specific_ssid|these instructions]].
* The injection techniques used in this tutorial depend on having... the access point is the single biggest reason why injection fails. OK, lets look at the symptoms so you conf
t on IRC.)
The first step is to make sure packet injection really works with your card and driver. The easiest way to test it is the [[injection_test|injectiontest]] attack. Make sure to perform this test prior to proceeding. Your card must be able to successfully inject in order to perfor...
The value after -a is the BSSID of your AP.
If injection works you should see something like this:
12:1... make sure your AP has MAC filtering disabled
- test it against another AP
- make sure your driver i
ure your card can inject by testing it with the [[injection_test|aireplay-ng injectiontest]]. Also specifically ensure you can communicate ... Again, this can be confirmed with the aireplay-ng injectiontest.
* Make sure to delete **prga.log** if you are