Differences

This shows you the differences between two versions of the page.

--- rt2570 [2008/07/27 01:40] – aspj
+++ rt2570 [2017/01/09 21:31] (current) – Mark page as deprecated. mister_x
@@ Line 1: / Line 1: @@
+====== DEPRECATED ======
+**IMPORTANT NOTE**: This page is deprecated, updated documentation can be found [[install_drivers|here]]
 ====== rt2570 ======
@@ Line 5: / Line 9: @@
   ifconfig rausb0 down
   rmmod rt2570
-  wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt2570-k2wrlz-1.6.2.tar.bz2
+  wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt2570-k2wrlz-1.6.3.tar.bz2
-  tar -xvjf rt2570-k2wrlz-1.6.2.tar.bz2
+  tar -xvjf rt2570-k2wrlz-1.6.3.tar.bz2
-  cd rt2570-k2wrlz-1.6.2/Module
+  cd rt2570-k2wrlz-1.6.3/Module
   make && make install
   modprobe rt2570
@@ Line 16: / Line 20: @@
 ===== Troubleshooting Tips =====
-Make sure you have the newest version 1.6.2 installed. It has a LOT of bugs fixes!
+Make sure you have the newest version 1.6.3 installed. It has fixes for the new kernel version 2.6.27.
 Note that this driver currently does not work on big endian systems, such as the PowerPC. Attempting to run "ifconfig rausb0 up" will cause ifconfig to use 100% CPU power, bringing your system to a crawl and never actually working.
@@ Line 28: / Line 32: @@
   * Use the newest kernel you can get
   * Try to use a non SMP version of your kernel
-  * If the hardware totally loses its function: Use the oven method to get it back to life: http://tinyshell.be/aircrackng/forum/index.php?topic=233.msg6371#msg6371
+  * If the hardware totally loses its function: Use the oven method to get it back to life: http://forum.aircrack-ng.org/index.php?topic=233.msg6371#msg6371
 ===== When to use this driver? =====
-See this [[http://tinyshell.be/aircrackng/forum/index.php?topic=2306.msg12907#msg12907|message]].
+See this [[http://forum.aircrack-ng.org/index.php?topic=2306.msg12907#msg12907|message]].
 If you have a Ralink chip in an USB device and that chip is a RT2570 or RT73 (RT73 is also known as RT2571 and RT2573), you need the "rt2570" or "rt73" driver. The "rt2500" driver is only for PCI/PCMCIA devices.
 Using legacy drivers (or ASPj mods) interface name is ra0 for PCI/PCMCIA and rausb0 for USB devices, if you have wlan0 and wmaster0 interfaces, then you are using new rt2x00 driver (rt2x00 has various modules, for USB devices they are "rt2x00lib", "rt2x00usb" and "rt2500usb", unload them and load "rt2570" if you want to use the other driver).